No Products in the Cart
If liquid calcium carbonate flows out of your tap instead of clean, soft water, and white or yellow sediment forms on taps, in the kettle and other household appliances, you know how much work and effort you have to put in the fight against this insidious enemy. Once removed, sediments reappear like weeds on the plot. While removing external symptoms improves your mood, it does not eliminate the root cause of the problem. Hard well water occurs in many areas, and its use entails not only time and effort put into maintaining cleanliness, but also considerable costs resulting from excessive use of household appliances (washing machine, dishwasher, fittings), central heating installation or hot water heaters and storage tanks. Replacing or repairing most of these devices is an expense far higher than buying a good water softening system.
The Global Water softener is a fully automatic, maintenance-free device that will be a perfect guardian of your comfort. Installed at the water point of entry in the building, it will provide perfectly soft water for the whole family—the carbon media used in the system will perfectly remove chlorine and other chemical pollutants appearing in municipal or well water. Reliable control valve, the best regeneration process of the ion exchange media and a 10-year warranty are just some of the advantages of this device. Add a special offer for additional equipment to the really good price, and full happiness is right there. Now, to use clean and soft water, you just need to add the product to your cart and submit the order—we’ll do the rest.
Specification of the Global Water Carbon Softener:
Dimensions [cm]: height 104.5 x width 31.0 x depth 44.0 (+water connection 5.0)
Maximum hardness of the feed water: 88°N (1500 mg CaCO3)
Maximum water flow: 3000 l/h
Resin Volume: 20 liters
Type of ion exchange resin: Purolite C100E
Carbon media volume: 5 liters
Type of carbon media: Hydroanthracite
Brine tank capacity: 50 kg
Feed water temperature: 5 – 38°C
Supply pressure: 1.5 – 6 bar
Water connection: 3/4″
Power supply: 220V/50Hz (safe transformer included)
Number of people using the water: 1 – 5
A drain connection is required (it does not need to be nearby)
Regeneration mode: metered
Type of regeneration: UP-Flow (counter-current regeneration)
Water access during regeneration: YES
Information about the lack of salt: YES
Preparation of brine from soft water: YES
Power consumption: 3W during operation and 15W during regeneration
Average salt consumption for regeneration: 2.9 kg
Average water consumption for regeneration: 137 l
Recommended resin replacement: every 20 years
Intuitive softener control valve that can be programmed even by a child! Multilanguage menu. Just set the current time and the hardness of the supply water (compensated by the content of the compounds described above) and that’s it—the electronic control module will do the rest. From now on, you can forget about hard water problems. Memory backup will ensure that programming data will not be lost due to power failure.
The device does not reduce the mains pressure.
Dry brine tank and salt grate—a guarantee of no salt deposits inside the brine tank.
Few moving parts and no metal parts that can cause corrosion or oxidation.
The counter-current resin regeneration system ensures an even distribution of the brine and effective regeneration with a small amount of salt used during regeneration.
Internal water bypass within the valve ensures continuous access to water by the user, even in during resin regeneration.
Preparation of brine for regeneration—automatic, with soft water.
Reliable, microprocessor-based control system for water treatment.
High efficiency of water purification
Iron removal function
Chemical contamination removal function
Extremely simple device programming: user-friendly and clear control panel
24V voltage power supply
Triple anti-overflow protection
Memory of programmed settings
Effective and reliable disc control valve
Polyethylene brine tank with increased density and strength
Fiberglass reinforced cylinder for ion exchange resin
Setting the duration of the regeneration cycles
UP-Flow regeneration in metered mode
24 hour clock
Information on the remaining amount of soft water
Display of the time remaining until the end of regeneration
Treated water flow meter
Low salt alarm
Treated water quality control